Nobody likes a wet floor. If you’re bathing in your shower, there’s bound to be disappointment at where the water seems to be coming from.
Leaking pipes and drains are often a source of great alarm. While not catastrophic, a leaky tub drain can make things difficult. However, it’s not always clear what caused the problem, what to do about it, or how expensive the fix will be.
So, read on to find out how to fix a leaky tub drain.
Remove the Screws That Hold the Drain Cover in Place
To remove the screws that hold the drain cover in place, you first need to remove the overflow plate from the side of the tub. Once this is done, you will be able to access the screws that secure the drain cover. Using a flat-head screwdriver, you should be able to unscrew the screws enough so that you can remove the drain cover.
Be sure to use caution as you do this to prevent any damage to the screws. Once the screws have been removed, you can gently pull the drain cover away.
Remove the Old Gasket
Once the drain stopper is removed, you’ll then be able to gain access to the old gasket and will be able to take it out.
Before replacing the gasket with a new one, be sure to clean around the drain flange area and take out any debris or buildup. You can then slide the new gasket over the drain flange and tighten the screw on the back of the overflow plate.
Reassemble the drain stopper and flush the drain with hot water to ensure a tight and secure fit. Once the new gasket has been put in, the leak should be gone.
Reattach the Screws
Make sure the screws are tightened firmly but not too tight, as this can damage the surrounding areas of the bathtub. After reattaching the screws, place the drain cover back into its place and press down slightly to create a tight fit.
Reattaching the screws that hold the drain cover in place helps ensure that home drains are properly fixed.
Test for Leaks
If any water runs out of the pipe, then you know it leaks. If you also notice any water around the sides of the tub, or a watermark on the tub, this could indicate a potential leak that needs to be repaired.
It is important to make sure to check the seal between the grout and tile, as well as check for any potential cracks in the porcelain that could lead to further water damage.
However, if you still notice leaking, you need professional plumbing services to help you with your plumbing problems.
Learn How to Fix a Leaky Tub Drain Today
This guide has given you a straightforward approach to how to fix a leaky tub drain. Knowing the steps to fix this issue can help you save time and money down the road. If you follow this guide, you will be able to take care of the problem with ease.
So don’t wait another minute; take the time today to go and fix that leaky drain!
Did you find this article helpful? Check out the rest of our blogs!
