Did you experience turning on the heater but no hot water?
No hot water as part of the water damage costs about 20 billion annually. But as far as problems with hot water go, this is one of the easier ones to fix. Provided that you catch it in time.
If you think that you’re having hot water issues, there are four easy things that you can do that will help you to pinpoint the issue and get things back up and running again.
Learn these steps so that you can avoid costly and frustrating appointments with your hot water tank repair man.
1. Consult the User Manual
The first thing to do when you find hot water not working is to consult the user manual. The user manual should give detailed instructions on how to troubleshoot common issues associated with your hot water heater. It may give a list of common problems and how to fix them.
Additionally, the manual may contain information on how to contact the water heater repair service for issues that are beyond repair. If you do not have your user manual, then you can try to locate a copy online.
2. Inspect the Regulation Valve
Before attempting to inspect the regulation valve, make sure the hot water shutoff valves are both in an open position. If the hot water isn’t working, it is important to inspect the regulation valve to make sure it is operating correctly. The regulation valve is usually located on the cold water line leading to the hot water heater.
Use a screwdriver to gain access to the valve and examine its condition. If it is blocked or stuck, it may indicate a problem. Check for any debris that could be blocking the valve from opening.
To repair the valve, you may need to turn off the main water supply and shut off the power to the heater. It is important to determine if the issue is caused by a defective valve or if there is an issue with the heater.
3. Check the Circuit Breaker
The circuit breaker is generally located in an access box, often found in the garage or outside of your home. Ensure the switch for your hot water heater is in the ON position. If not, turn it into the ON position and allow time for your hot water heater to heat up.
4. Look for Signs of Corrosion
Before you decide on a water heater replacement, look for any signs of corrosion. Corrosion can occur when the minerals in the water react to metallic parts in the hot water system, causing them to break down.
Common signs of corrosion include rust, greenish or blueish stains, and warped or pitted surfaces. Corrosion in the hot water system can cause a wide range of problems, including low water pressure, water discoloration, and water leaks.
Fix Your No Hot Water Issue Today
Dealing with no hot water is a problem no one wants to have. Taking the right steps to diagnose and fix the problem can help get the water heater not working running again. Consult the user manual, inspect the regulation valve, check the circuit breaker, and look for signs of corrosion.
Make sure to take action quickly and safely to restore hot water.
Don’t stop learning now. Check out more of our guides to learn all you can today!
