6 Residential AC Installation Errors and How to Avoid Them

Do you want to learn more about air conditioner installation in residential areas?

Installing residential air conditioners can be tricky. There are multiple things that can go wrong. It’s not as simple as you’d think.

If you’re thinking about installing a residential AC yourself. Check out this guide. This will tell you about some of the most common residential AC installation errors. And how to avoid them.

1. Incorrect Wiring Installation

Incorrect wiring can be dangerous and can even lead to electrocution and fire risk. To avoid this error, it is important to hire a professional technician with experience in AC installation. Ensure that they have the right wiring and tools to install your AC safely. The technician should also check that the wiring installation is correct and up to building code standards. 

2. Incorrect Insulation

Poor insulation can cause the AC system to run inefficiently. This results in the need for more frequent repairs. It can also cause your energy bills to rise. To avoid these problems, be sure to use the right insulation between your AC unit and the indoor space. Use a quality vapor barrier to keep humidity out as well as seal any gaps in the joints for better insulation. 

3. Improper Sizing

Sizing the unit correctly is key for proper cooling and efficiency. To properly measure an AC unit size, one needs to take into account the size of the area or room, the level of insulation present, the amount of direct sunlight, and other factors related to the home’s climate.

They should be familiar with the home’s environment. You should also use the correct measuring tools before recommending and installing the installation. Specialists from this air conditioning installation service can help you figure out the size that will suit your needs. 

4. Inadequate Ventilation

To ensure proper installation, ensure that all vents and registers are properly sized, aligned, and balanced to give adequate airflow for the unit. If not, the unit may end up drawing in the air from the attic or other areas. This can introduce added humidity, dust, allergens, and other pollutants. 

Be sure to consult with a certified contractor when installing a new air conditioner and always check to make sure all vents are correctly vented. 

5. Poor Sealing of the Ductwork

Poor sealing of the ductwork can leak air. This results in energy loss and having to run the AC at higher than necessary levels to make up for it. To avoid this error, it’s important to have a professional inspect the ductwork after the AC installation process for a secure seal. Air-tight ductwork should be a priority for any residential AC installation. 

6. Incorrect Placement of the Thermostat

Make sure to install the thermostat in an area of the home that is away from any drafts, direct sunlight, and sources of heat. Having the thermostat too close to these elements can cause inaccurate readings, leading to ineffective cooling or even system overload. It’s best to place the thermostat in a central location in the home, allowing it to read at an average temperature. 

Avoid These Residential AC Installation Errors

It is important to be mindful of the risks that may occur due to residential AC installation errors. Seek the help of a professional for your installation to be properly completed.

By taking extra steps for proper installation, you can enjoy a safe, reliable AC system that functions efficiently. Contact your local AC specialist today for a professional installation.

Feel free to browse our blog for more interesting reads.