Adding a sump pump to the home can keep one’s loved ones safe in a basement flood. However, only some buildings need one. Depending on the age and construction of a house, a pump may be optional. If folks are still determining whether or not their building needs a sump pump, they must consult with an experienced contractor.
Installing such a machine can be a daunting task. This blog will teach you how to install a sump pump correctly so that it can provide years of reliable service.
Step 1: Dig a hole at the right spot
The first step is determining where you want to install the tool. Generally, the ideal spot for a sump pump is in an area with water on two or more sides. However, if you don’t have any water bodies on two or more sides, you can still install the pump if you dig a hole six inches deep and 10 inches broader than the pump. In this case, the machine must be connected to the street’s drainage system.
Step 2: Placing
Next, place the machine in the hole. Make sure it’s sitting flat on the bottom and fully seated in the hole. Use gravel to secure it in place. Folks can also use pressure-relieving cables if their foundation is made of masonry or concrete.
Step 3: Connect the discharge pipe and adaptors
A discharge pipe and adaptors must be connected to the sump pump. The discharge pipe must be long enough to reach all the basements and floor levels in your home.
Step 4: Check the valve and connect the drainage system
Next, you will need to check the valve on your model. Before connecting with the drainage system, this valve should be checked for proper operation. If the valve does not open and closes properly, it may need to be replaced.
Now, connect the discharge pipe to your drainpipe using an appropriate-size connector. Make sure you choose a connector that can handle the water flow.
Step 5: Install the pit cover and test the machine
Install the pit cover and connect the pumping system to your home’s water supply. Test the system by filling a bucket with water and placing it in the pit. Turn on the switch to see whether the water level has decreased. If it has, enjoy peace of mind knowing your new pumping machine keeps your home dry.
Is It Necessary to Hire a Professional to Install It?
If you’re considering installing a sump pump, it’s essential to consider the cost and ease of installation. On average, its installation costs around $1,000-$1,500.
If you have a basic understanding of using a sump pump and the tools needed, you can install one by using the methods mentioned above. But before you start, read the instruction manual that came with your product.
If you still have questions regarding how to install a sump pump, consult a professional. A professional can help you choose the correct size product for your needs and ensure that it is installed correctly. Hiring a professional would be best if you want to save time.
Wrap Up
Installing a sump machine is essential to keeping your home safe and dry. Get a certified model that fits your home’s requirements, and be sure to have it inspected annually. Finally, keep an eye on your machine’s water level and replace or check the filters regularly.
